INSTALLATION

1. INSTALL ACCESSORY METER ASSEMBLY

(a) Install the accessory meter with the 3 screws.

(b) Connect the connector.

2. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

3. INSTALL DEFROSTER NOZZLE ASSEMBLY

4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

5. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

6. INSTALL NO. 1 HEATER TO REGISTER DUCT

7. INSTALL GLOVE BOX LIGHT ASSEMBLY

8. INSTALL NO. 3 INSTRUMENT PANEL STAY

9. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 8 Speakers)

10. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 14 Speakers)

11. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT

12. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)

13. INSTALL NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

14. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH

15. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

16. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH

17. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

18. INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

19. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

20. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

21. INSTALL FRONT PILLAR GARNISH RH

22. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

23. INSTALL COWL SIDE TRIM BOARD RH

24. INSTALL FRONT DOOR SCUFF PLATE RH

25. INSTALL INSTRUMENT SIDE PANEL RH

26. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

27. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

28. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

29. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL

30. INSTALL COMBINATION METER ASSEMBLY

31. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

32. INSTALL FRONT CONSOLE BOX

33. INSTALL REAR CONSOLE BOX ASSEMBLY

34. INSTALL CONSOLE BOX CARPET

35. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

36. INSTALL REAR CONSOLE BOX POCKET

37. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

38. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

39. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

40. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

41. INSTALL INSTRUMENT SIDE PANEL LH

42. INSTALL FRONT PILLAR GARNISH LH

43. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

44. INSTALL COWL SIDE TRIM BOARD LH

45. INSTALL FRONT DOOR SCUFF PLATE LH

46. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

47. INSTALL UPPER STEERING COLUMN COVER

48. INSTALL LOWER STEERING COLUMN COVER

49. INSTALL STEERING WHEEL ASSEMBLY

50. INSTALL STEERING PAD

51. INSTALL LOWER NO. 3 STEERING WHEEL COVER

52. INSTALL LOWER NO. 2 STEERING WHEEL COVER

When disconnecting the cable some systems need to be initialized after the cable is reconnected .

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

(a) Inspect the SRS warning light .